Spectral linewidth narrowing of broad-area blue diode bar in V-shape external Talbot cavity.

A 1-D linear array of 23 high-power broad-area laser diode (BALD) beams in the blue spectral region (447 nm) is combined employing a V-shape external Talbot cavity in Littrow configuration. A surface grating provides optical feedback via self-imaged diffractive coupling to the diode bar and induces all the emitters to lase at a common central wavelength. The external cavity reduces the spectral linewidth of the free-running laser diode bar from several nm to 20-50 pm (FWHM) with the power level of 11.8 W. The narrow spectrum of the external cavity stabilized laser can be tuned in the range of 3-4 nm by adjusting the tilt angle of the grating while the laser diode bar is operated in constant current mode at a temperature of 20°C.

Observation of chiral state transfer without encircling an exceptional point.

The adiabatic theorem, a corollary of the Schrödinger equation, manifests itself in a profoundly different way in non-Hermitian arrangements, resulting in counterintuitive state transfer schemes that have no counterpart in closed quantum systems. In particular, the dynamical encirclement of exceptional points (EPs) in parameter space has been shown to lead to a chiral phase accumulation, non-adiabatic jumps and topological mode conversion1-8. Recent theoretical studies, however, have shown that contrary to previously established demonstrations, this behaviour is not strictly a result of winding around a non-Hermitian degeneracy9. Instead, it seems to be mostly attributed to the non-trivial landscape of the Riemann surfaces, sometimes because of the presence of an EP in the vicinity9-11. Here, in an effort to bring this counterintuitive aspect of non-Hermitian systems to light and confirm this hypothesis, we provide a set of experiments to directly observe the field evolution and chiral state conversion in an EP-excluding cycle in a slowly varying non-Hermitian system. To do so, a versatile yet unique fibre-based photonic emulator is realized that utilizes the polarization degrees of freedom in a quasi-common-path single-ring arrangement. Our observations may open up new avenues for light manipulation and state conversion, as well as providing a foundation for understanding the intricacies of the adiabatic theorem in non-Hermitian systems.

Direct modulation of electrically pumped coupled microring lasers.

We demonstrate how the presence of gain-loss contrast between two coupled identical resonators can be used as a new degree of freedom to enhance the modulation frequency response of laser diodes. An electrically pumped microring laser system with a bending radius of 50 µm is fabricated on an InAlGaAs/InP MQW p-i-n structure. The room temperature continuous wave (CW) laser threshold current of the device is 27 mA. By adjusting the ratio between the injection current levels in the two coupled microrings, our experimental results clearly show a bandwidth improvement by up to 1.63 times the fundamental resonant frequency of the individual device. This matches well with our rate equation simulation model.

Spectral linewidth narrowing of two broad-area blue laser diodes (445 nm) with a common external cavity.

Two watt-level broad-area laser diodes were simultaneously locked into a common external cavity made using a surface grating in a Littrow configuration. The spectral linewidth of the combined laser beam was narrowed down from over a nanometer to 10-15 pm (FWHM), and the output power was the sum of the power of the individually locked laser diodes. The spectrum of the combined laser beam can be tuned over a range of 2-3 nm by changing the tilt angle of the grating and varying the injection currents of each laser diode.

Broadband cholesteric liquid crystal lens for chromatic aberration correction in catadioptric virtual reality optics.

A planar and broadband cholesteric liquid crystal (CLC) lens is designed, fabricated, and hybridized with a refractive lens to form a catadioptric pancake lens for virtual reality (VR) displays. Due to their opposite optical dispersion behaviors, the chromatic aberration of the assembled pancake lens is dramatically suppressed, as verified by both ray-tracing analysis and experimental results. The demonstrated catadioptric pancake lens has great potential for next-generation VR displays.

All-Fiber Measurement of Surface Tension Using a Two-Hole Fiber.

An all-fiber approach is presented to measure surface tension. The experimental realization relies on the use of a specialty fiber, a so-called two-hole fiber (THF), which serves a two-fold purpose: providing a capillary channel to produce bubbles while having the means to measure the power reflected at the end facet of the fiber core. We demonstrate that provided a controlled injection of gas into the hollow channels of the THF, surface tension measurements are possible by simply tracking the Fresnel reflection at the distal end of the THF. Our results show that the characteristic times involved in the bubble formation process, from where the surface tension of the liquids under test is retrieved, can be measured from the train of pulses generated by the continuous formation and detachment of bubbles.

Enhanced modulation characteristics in broken symmetric coupled microring lasers.

The dynamical behavior of broken symmetric coupled cavity lasers is theoretically investigated. The frequency response of this class of lasers is obtained using small signal analysis under direct modulation. Our model predicts a modulation bandwidth enhancement as a broken symmetric laser, operating in the parity-time (PT) symmetry and non-PT symmetry domains. This theoretical prediction is numerically examined in a laser system based on an InGaAs quantum dot platform. Our results clearly show that in these structures, in addition to the injection current, the gain-loss contrast can be used as a new degree of freedom in order to control the characteristic poles of the frequency response function.

Measuring the frequency response of optically pumped metal-clad nanolasers.

We report on our initial attempt to characterize the intrinsic frequency response of metal-clad nanolasers. The probed nanolaser is optically biased and modulated, allowing the emitted signal to be detected using a high-speed photodiode at each modulation frequency. Based on this technique, the prospect of high-speed operation of nanolasers is evaluated by measuring the D-factor, which is the ratio of the resonance frequency to the square root of its output power(fR/Pout1/2). Our measurements show that for nanolasers, this factor is an order of magnitude greater than that of other state-of-the-art directly modulated semiconductor lasers. The theoretical analysis, based on the rate equation model and finite element method simulations of the cavity is in full agreement with the measurement results.

Integrated multi-port circulators for unidirectional optical information transport.

On-chip photonic networks hold great promise for enabling next-generation high speed computation and communication systems. It is currently envisioned that future integrated photonic networks will be capable of processing dense digital information on a single monolithic platform by involving a multitude of optical components ranging from lasers to modulators, to routers, interconnects and detectors. Among the possible functionalities to be incorporated in such arrangements is the ability to route information in a unidirectional way among N-ports - a capability typically afforded through the use of optical circulators. Yet, in many settings, what is basically needed is re-routing information in a unidirectional fashion without necessarily invoking optical isolation. Of interest would be to devise strategies through which miniaturized optical devices can be monolithically fabricated on light-emitting semiconductors by solely relying on physical properties that are indigenous to the material itself. By exploiting the interplay between non-Hermiticity and nonlinearity, here we demonstrate a new class of chip-scale information transport devices on spatially modified III-V quantum well systems. These unidirectional structures are broadband (over 2.5 THz) at 1550 nm, effectively loss-free, color-preserving, and in proof-of-principle demonstrations have provided 23 dB isolation when used under pulsed-mode conditions at milliwatt (mW) power levels.

Multicore fiber sensor for high-temperature applications up to 1000°C.

A novel high temperature sensor based on customized multicore fiber (MCF) is proposed and experimentally demonstrated. The sensor consists of a short, few-centimeter-long segment of MCF spliced between two standard single-mode fibers. Due to interference effects, the transmission spectrum through this fiber chain features sharp and deep notches. Exposing the MCF segment to increasing temperatures of up to 1000°C results in a shift of the transmission notches toward longer wavelengths with a slope of approximately 29 pm/°C at lower temperatures and 52 pm/°C at higher temperatures, enabling temperature measurements with high sensitivity and accuracy. Due to its compact size and mechanical rigidity, the MCF sensor can be subjected to harsh environments. The fabrication of the MCF sensor is straightforward and reproducible, making it an inexpensive fiber device.

On-chip surface plasmon resonance sensor.

A novel on-chip micro SPR (surface plasmon resonance) sensor based on an optoelectronic platform has been developed. This research aims for a fully integrated SPR sensor system to achieve a miniaturized, high throughput sensor system. A novel method for design and fabrication of the solid state SPR sensor device has been investigated. The generation and detection of the SPR sensor signal from the proposed platform has been proved using a simulated binding experiment.